Vous allez choisir Pass4Test après essayer une partie de Q&A Juniper JN0-643 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Juniper JN0-643.
Choisissez le Pass4Test, choisissez le succès de test Juniper JN0-643. Bonne chance à vous.
On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification Juniper JN0-643. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.
Est-ce que vous vous souciez encore de réussir le test Juniper JN0-643? Est-ce que vous attendez plus le guide de formation plus nouveaux? Le guide de formation vient de lancer par Pass4Test peut vous donner la solution. Vous pouvez télécharger la partie de guide gratuite pour prendre un essai, et vous allez découvrir que le test n'est pas aussi dur que l'imaginer. Pass4Test vous permet à réussir 100% le test. Votre argent sera tout rendu si vous échouez le test.
L'équipe de Pass4Test autorisée offre sans arrêt les bonnes resources aux candidats de test Certification Juniper JN0-643. Les documentations particulièrement visée au test Juniper JN0-643 aide beaucoup de candidats. La Q&A de la version plus nouvelle est lancée maintenant. Vous pouvez télécharger le démo gratuit en Internet. Généralement, vous pouvez réussir le test 100% avec l'aide de Pass4Test, c'est un fait preuvé par les professionnels réputés IT. Ajoutez le produit au panier, vous êtes l'ensuite à réussir le test Juniper JN0-643.
Code d'Examen: JN0-643
Nom d'Examen: Juniper (Enterprise Routing and Switching, Professional (JNCIP-ENT))
Questions et réponses: 114 Q&As
JN0-643 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-643.html
NO.1 Click the Exhibit button.
The exhibit shows the output of an OSPF router LSA.
Which interface ID represents the router's loopback address?
A. ID 10.1.1.0
B. ID 10.0.3.4
C. ID 10.0.3.3
D. ID 10.0.2.4
Answer: B
Juniper JN0-643 certification JN0-643 JN0-643 examen
NO.2 A medium-sized enterprise has some devices that are 802.1X capable and some that are not. Any
device that fails authentication must be provided limited access through a VLAN called NONAUTH. How
do you provide this access?
A. Configure NONAUTH VLAN as the guest VLAN.
B. Configure NONAUTH VLAN as the server-reject VLAN.
C. Configure NONAUTH VLAN as the guest VLAN and the server-reject VLAN
D. Configure a separate VLAN for each type of user: 802.1X and non-802.1X.
Answer: C
Juniper JN0-643 JN0-643 JN0-643 JN0-643 examen
NO.3 When 802.1X, MAC-RADIUS, and Captive Portal are enabled on an interface, which
authentication sequence occurs?
A. The authentication sequence is based on the order of the configuration.
B. If MAC-RADIUS is rejected, Captive Portal will start. If Captive portal is timed out, 802.1X will start.
C. If 802.1X times out, then MAC-RADIUS will start. If MAC-RADIUS is timed out by the RADIUS server,
then Captive Portal will start.
D. If 802.1X times out, then MAC-RADIUS will start. If MAC-RADIUS is rejected by the RADIUS server,
then Captive Portal will start.
Answer: D
certification Juniper JN0-643 JN0-643 examen
NO.4 Port authentication falls back to Captive Portal. In which two scenarios would the port
authentication move back to 802.1X? (Choose two.)
A. if any MAC RADIUS request packet is received on the interface and if there are no sessions in
authenticated/authenticating state
B. if Captive Portal is deactivated on the interface
C. if the user gets logged out
D. if the EAP packet is received on the interface and if there are no sessions in
authenticated/authenticating state
Answer: B,D
Juniper examen JN0-643 examen JN0-643 certification JN0-643 JN0-643 examen
NO.5 Click the Exhibit button.
Based on the output shown in the exhibit, why is VSTP not working for VLAN 100?
A. No interfaces are assigned to VLAN 100.
B. Your MSTI is misconfigured.
C. RSTP is configured in addition to VSTP.
D. No native VLAN is configured.
Answer: A
Juniper examen JN0-643 certification JN0-643 certification JN0-643
NO.6 What is the default LLDP timeout?
A. 60 seconds
B. 90 seconds
C. 120 seconds
D. infinite
Answer: C
Juniper examen JN0-643 examen certification JN0-643 certification JN0-643 certification JN0-643
NO.7 A user complains about connectivity problems from their IP address (10.1.1.87) to a server
(10.65.1.100).Which Junos command can help verify connectivity in the network? (Choose two.)
A. mroute
B. traceoptions
C. ping
D. clear bgp neighbor
Answer: B,C
Juniper JN0-643 examen JN0-643 JN0-643 JN0-643
NO.8 Which two LSA types are only generated by an ABR router? (Choose two.)
A. ASBR summary LSA (Type 4)
B. ASBR LSA (Type 5)
C. Summary LSA (Type 3)
D. Router LSA (Type 1)
Answer: A,C
certification Juniper certification JN0-643 JN0-643 JN0-643 JN0-643 JN0-643
NO.9 If your WAN-edge router is multihomed to different ISPs, which two BGP attributes would you modify to
affect outbound traffic? (Choose two.)
A. MED
B. origin
C. local preference
D. community
Answer: B,C
certification Juniper JN0-643 JN0-643 JN0-643
NO.10 Click the Exhibit button.
Referring to the output in the exhibit, why does the router prefer the path toward interface ge0/0/0.0 for the
20.0.0.0/8 route?
A. The origin is IGP.
B. The origin is unknown.
C. The AS path is longer.
D. Multihop is enabled.
Answer: A
certification Juniper JN0-643 JN0-643 certification JN0-643
NO.11 Click the Exhibit button.
Host 1, Host 2, and Host 3 are connected to Switch A on interface ge-0/0/2. Host 1 and Host 2 have been
authenticated through 802.1X, however Host 3 does not have an 802.1X supplicant.
Referring to the configuration in the exhibit, how can Host 3 be authenticated?
A. secure-authentication option of HTTP or HTTPS must be configured for Captive Portal.
B. MAC RADIUS authentication must be configured for Host 3 instead of Captive Portal.
C. A new authentication-profile must be configured because 802.1X and Captive Portal cannot have the
same authentication-profile.
D. The 802.1X server failback feature must be configured for Host 3 to allow non-802.1X clients to
authenticate.
Answer: B
Juniper examen JN0-643 JN0-643 JN0-643 examen
NO.12 Click the Exhibit button.
In the exhibit, which statement about the ABR between Area 8 and Area 2 is true?
A. The router has connectivity to all areas.
B. The router has connectivity to Area 8 only.
C. The router has connectivity to Area 2 only.
D. The router has connectivity to all routers in Area 8 and Area 2.
Answer: D
Juniper examen certification JN0-643 JN0-643 JN0-643 examen
NO.13 Click the Exhibit button.
Based on the configuration in the exhibit, why are you seeing drops in the best-effort queue on the SRX
Series platform.?
A. The drop-profile fill level is set too low.
B. Packets are dropped by a firewall policy.
C. The best-effort queue is being shaped.
D. The scheduler is not being applied correctly.
Answer: C
certification Juniper certification JN0-643 JN0-643 certification JN0-643 JN0-643
NO.14 Click the Exhibit button.
A user on port ge-0/0/12 fails an 802.1x authentication attempt.
What is the next action of Switch A?
A. It puts the Authenticator in the HELD status where all EAPOL packets are discarded until the default
hold timer expires.
B. It communicates with the RADIUS server to confirm the user's password.
C. It transmits an EAP-Identity-Request packet immediately after it sends out EAP-Failure.
D. It tries to authenticate the user using MAC radius authentication.
Answer: C
Juniper JN0-643 JN0-643 certification JN0-643
NO.15 Click the Exhibit button.
Based on the output shown in the exhibit, which protocol is configured?
A. MSTP
B. RSTP
C. STP
D. VSTP
Answer: D
Juniper JN0-643 JN0-643 JN0-643 examen JN0-643
Le test simulation offert par Pass4Test est bien proche du test réel. Vous pouvez apprendre tous essences d'un test réel à courte terme avec l'aide de Pass4Test. Pass4Test peut vous assurer le succès 100% de test Juniper JN0-643.
没有评论:
发表评论