La grande couverture, la bonne qualité et la haute précision permettent le Pass4Test à avancer les autre sites web. Donc le Pass4Test est le meilleur choix et aussi l'assurance pour le succès de test Juniper JN0-533.
Si vous voulez ne se soucier plus à passer le test Juniper JN0-533, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test Juniper JN0-533. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A Juniper JN0-533 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.
Le test Juniper JN0-533 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test Juniper JN0-533 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.
La Q&A Juniper JN0-533 de Pass4Test est liée bien avec le test réel de Juniper JN0-533. La mise à jour gratuite est pour vous après vendre. Nous avons la capacité à vous assurer le succès de test Juniper JN0-533 100%. Si malheureusement vous échouerez le test, votre argent sera tout rendu.
Code d'Examen: JN0-533
Nom d'Examen: Juniper (FWV, Specialist (JNCIS-FWV))
Questions et réponses: 110 Q&As
Pass4Test est un fournisseur de formation pour une courte terme, et Pass4Test peut vous assurer le succès de test Juniper JN0-533. Si malheureusement, vous échouez le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit avant de choisir Pass4Test. Au moment là, vous serez confiant sur Pass4Test.
Si vous traviallez dur encore pour préparer le test de Juniper JN0-533 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test Juniper JN0-533.
JN0-533 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-533.html
NO.1 Click the Exhibit button.
In the exhibit, you have configured the MIP address 1.1.8.64 on a ScreenOS device.
Which statement is correct?
A. It performs one-to-one address translation and maps 1.1.8.64 to 10.1.10.64.
B. It performs one-to-many address translation and maps 1.1.8.64 to a range from 10.1.10.64 to
10.1.10.71.
C. It performs range address translation and maps 1.1.8.64 to 10.1.10.64, 1.1.8.65 to 10.1.10.65,
etc..
D. It performs address translation using a random IP address from the pool for 10.1.10.64 / 29.
Answer: C
Juniper JN0-533 certification JN0-533 JN0-533 JN0-533
NO.2 -- Exhibit -set admin name "admin" set admin password "nOsYMqrbAs/McFsJrs6HwcIt3AF6yn"
set admin user "User1" password "nLZwKErINPPCcphC6sFMXrJ" privilege "read-only" set admin port
8080 set admin access attempts 5 set admin access lock-on-failure 5 set admin auth web timeout 10
set admin auth server "Local" -- Exhibit -
User1 wants to create the policy in the ScreenOS device, but is not successful. Referring to the
exhibit, what is the problem?
A. The User1 account has been suspended.
B. User1 does not have any account in this device.
C. User1 logged in to the device with wrong port.
D. User1 does not have the proper permission to create a policy.
Answer: D
Juniper certification JN0-533 certification JN0-533 certification JN0-533
NO.3 Click the Exhibit button.
Referring to the exhibit, what is the appropriate VPN monitor status?
A. The VPN is active and the peer is down.
B. The VPN is active and VPN Monitor is not configured for the peer.
C. The VPN is active and the peer is up.
D. The VPN is inactive and VPN Monitor is not configured for the peer.
Answer: B
Juniper JN0-533 JN0-533
NO.4 Which two statements are true about policy-based VPNs as compared to route-based IPsec
VPNs when using ScreenOS devices? (Choose two.)
A. For policy-based IPsec VPNs, you can configure 0.0.0.0/ 0 as the proxy ID on both VPN gateways
regardless of the security policy.
B. For route-based IPsec VPNs, you can configure 0.0.0.0/ 0 as the proxy ID on both VPN gateways
regardless of the security policy.
C. For route-based IPsec VPNs, the proxy ID is derived from the policy.
D. For policy-based IPsec VPNs, the proxy ID is derived from the policy.
Answer: B,D
Juniper JN0-533 examen JN0-533 examen certification JN0-533
NO.5 Which two statements are true about VPN Monitor on a ScreenOS device? (Choose two.)
A. With a route-based VPN failure, VPN Monitor marks the tunnel interface status as down.
B. With a policy-based VPN failure, VPN Monitor marks the tunnel interface status as down.
C. VPN Monitor uses UDP to detect a VPN connection failure.
D. VPN Monitor uses ICMP to detect a VPN connection failure.
Answer: A,D
Juniper certification JN0-533 JN0-533 JN0-533
NO.6 Which two configuration elements are synchronized between the members of an NSRP cluster?
(Choose two.)
A. interface IP addresses
B. hostname
C. track IP configuration
D. static routes
Answer: A,D
certification Juniper JN0-533 examen JN0-533
NO.7 You want to set up a last resort route and prevent route lookups in either the source-based
routing table or the destination-based routing table.
What should you do?
A. Disable SIBR and create a default route in the trust-vr table using the null interface as the
outgoing interface with a higher metric than other routes.
B. Disable SIBR and create a default route in the trust-vr table using the null interface as the
outgoing interface with a lower metric than other routes.
C. Enable SIBR and create a default route in the SIBR table using the null interface as the outgoing
interface with a higher metric than other routes.
D. Enable SIBR and create a default route in the SIBR table using the null interface as the outgoing
interface with a lower metric than other routes.
Answer: C
Juniper certification JN0-533 certification JN0-533 JN0-533 JN0-533
NO.8 HostA is in the Trust zone and has an IP address of. ServerA is a Web server in the DMZ zone
and has an IP address of.
Which three configuration statements are required to allow traffic from HostA to communicate with
ServerA? (Choose three.)
A. ssg5-> set address Trust HostA / 32
B. ssg5-> set policy from DMZ to Trust ANY ANY ANY permit
C. ssg5-> set address DMZ ServerA / 32
D. ssg5-> set policy from Trust to DMZ HostA ServerA HTTP permit
E. ssg5-> set address Trust HostA / 32
Answer: C,D,E
certification Juniper JN0-533 JN0-533 examen JN0-533 certification JN0-533
NO.9 You have configured integrated Web filtering in the ScreenOS software. A URL appears in the
blacklist, the whitelist, and a user-defined category. Additionally, the device can obtain
categorization information from the SurfControl server.
Which configuration will the device use to determine the action to take for Web requests for the
URL?
A. the blacklist
B. the SurfControl categorization
C. the user-defined category
D. the whitelist
Answer: A
certification Juniper certification JN0-533 JN0-533 examen
NO.10 Click the Exhibit button.
Which two statements are true regarding the route shown in the exhibit? (Choose two.)
A. 5.5.5.0/ 24 was configured as a source route with a next-hop IP address of 1.1.1.1 in the trustvr.
B. 5.5.5.0/ 24 was configured as a destination route with a next-hop IP address of 1.1.1.1 in the
trust-vr.
C. 5.5.5.0/ 24 was configured as a SIBR route with a next-hop IP address of 1.1.1.1 in the trust-vr.
D. 5.5.5.0/ 24 was configured as a permanent source route.
Answer: A,D
certification Juniper JN0-533 certification JN0-533 certification JN0-533 JN0-533 JN0-533 examen
Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de Juniper après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.
没有评论:
发表评论