Peut-être vous voyez les guides d'études similaires pour le test Microsoft MB7-840, mais nous avons la confiance que vous allez nous choisir finalement grâce à notre gravité d'état dans cette industrie et notre profession. Pass4Test se contribue à amérioler votre carrière. Vous saurez que vous êtes bien préparé à passer le test Microsoft MB7-840 lorsque vous choisissez la Q&A de Pass4Test. De plus, un an de service gratuit en ligne après vendre est aussi disponible pour vous.
Pour réussir le test Microsoft MB7-840 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test Microsoft MB7-840. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test Microsoft MB7-840 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.
Le test Microsoft MB7-840 peut bien examnier les connaissances et techniques professionnelles. Pass4Test est votre raccourci amené au succès de test Microsoft MB7-840. Chez Pass4Test, vous n'avez pas besoin de dépenser trop de temps et d'argent juste pour préparer le test Microsoft MB7-840. Travaillez avec l'outil formation de Pass4Test visé au test, il ne vous demande que 20 heures à préparer.
Obtenez la Q&A de test Microsoft MB7-840 de Pass4Test plus tôt, vous pouvez réussir le test Certification Microsoft MB7-840 plus tôt.
Chaque expert dans l'équipe de Pass4Test ont son autorité dans cette industrie. Ils profitent ses expériences et ses connaissances professionnelles à préparer les documentations pour les candidats de test Certification IT. Les Q&As produites par Pass4Test ont une haute couverture des questions et une bonne précision des réponses qui vous permettent la réussie de test par une seule fois. D'ailleurs, un an de service gratuit en ligne après vendre est aussi disponible pour vous.
Code d'Examen: MB7-840
Nom d'Examen: Microsoft (NAV 2009 C/SIDE Introduction)
Questions et réponses: 109 Q&As
Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification Microsoft MB7-840, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification Microsoft MB7-840. Peut-être d'obtenir le Certificat Microsoft MB7-840 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.
MB7-840 Démo gratuit à télécharger: http://www.pass4test.fr/MB7-840.html
NO.1 You are designing a new list page in Microsoft Dynamics NAV 2009. You need to set a card page that
is associated with the items in the current list page. Which property of the page is responsible for it and
replaces the Card-to-List functionality in Microsoft Dynamics NAV 5.0?
A. LookupFormID
B. DrillDownFormID
C. RunFormLink
D. CardFormID
Answer: D
Microsoft MB7-840 examen MB7-840 examen
NO.2 You need to create a multi-record page that enables users to simultaneously view multiple records from
a table and edit them if necessary. What type of page will you use?
A. List
B. RoleCenter
C. Worksheet
D. Document
Answer: AC
Microsoft examen MB7-840 examen certification MB7-840 certification MB7-840
NO.3 You are a Microsoft Dynamics NAV developer. You design a codeunit that must be able to
continuously receive events from an Automation server defined in it as a variable. How do you ensure this
behavior of the codeunit?
A. Define the variable of Automation type as a local variable on OnRun trigger and set SingleInstance
property of the codeunit to 'Yes'
B. Define the variable of Automation type as a local variable on OnRun trigger and set SingleInstance
property of the codeunit to 'No'
C. Define the variable of Automation type as a global variable and set SingleInstance property of the
codeunit to 'Yes'
D. Define the variable of Automation type as a global variable and leave SingleInstance property of the
codeunit as 'No'
Answer: C
Microsoft certification MB7-840 MB7-840 MB7-840 MB7-840
NO.4 How many objects are supported by the RoleTailored client in Microsoft Dynamics NAV 2009?
A. Six
B. Seven
C. Eight
D. Nine
Answer: A
Microsoft MB7-840 examen MB7-840 certification MB7-840
NO.5 Which objects in Microsoft Dynamics NAV 2009 can be exposed as Web services?
A. Pages
B. Codeunits
C. Tables
D. XMLports
Answer: AB
certification Microsoft MB7-840 MB7-840 MB7-840
NO.6 When accessing a Microsoft Dynamics NAV 2009 database using C/FRONT, which limitations do you
consider?
A. Keys cannot be activated within C/FRONT
B. Entries made by C/FRONT do not fire triggers
C. The C/FRONT granule requires a separate license
D. C/FRONT does not allow multiple user sessions
Answer: ABC
Microsoft MB7-840 certification MB7-840 MB7-840 examen
NO.7 Which of the following user communication functions is run non-modally?
A. STRMENU
B. MESSAGE
C. ERROR
D. CONFIRM
Answer: B
Microsoft MB7-840 examen MB7-840 examen MB7-840 certification MB7-840
NO.8 Which limitations do you consider when writing code that uses Automation?
A. Incoming data must conform to C/AL data type.
B. C/SIDE cannot receive events from the Automation servers that it controls.
C. Repetitive use of Automation server reduces performance.
D. Additional session is created when C/SIDE works with an Automation server.
Answer: AC
Microsoft MB7-840 MB7-840 certification MB7-840
NO.9 You are designing a new page. You have specified the type of the page and attached it to a table. You
need to add some controls that will display data. Which page element must you add before you start
creating new controls?
A. Container
B. Group
C. Part
D. ContentArea
Answer: A
Microsoft examen MB7-840 MB7-840 MB7-840 examen MB7-840 MB7-840
NO.10 Which of the following pairs of values in a relational expression are comparable?
A. Integer and Decimal
B. Date and DateTime
C. Text and Option
D. Option and Integer
Answer: AD
Microsoft certification MB7-840 MB7-840 certification MB7-840
NO.11 Which general C/SIDE concepts apply to pages as a new application object type in Microsoft Dynamics
NAV 2009?
A. Properties, keys, data items, fields, C/AL, and triggers
B. Properties, request form, C/AL, controls
C. Properties, request page, sections, controls, and triggers
D. Properties, C/AL, controls, and triggers
Answer: D
certification Microsoft certification MB7-840 MB7-840 certification MB7-840
NO.12 You have designed a blank form and attached a source table to it. You need to add a subform that
shows multiple records from another table. Which properties do you need to set for the subform?
A. SubFormLink
B. ParentControl
C. SubFomSource
D. SubFormID
Answer: AD
Microsoft MB7-840 MB7-840 certification MB7-840
NO.13 Which objects' main purpose is exporting and importing data in the RoleTailored client?
A. Dataports
B. XMLports
C. Pages
D. Codeunits
Answer: B
Microsoft examen MB7-840 MB7-840
NO.14 Which limitations do you consider when working with OCX custom controls?
A. Special license is required to run objects containing OCX controls.
B. C/SIDE does not support call-back from OCX.
C. Custom visual controls can only be used in the RoleTailored client.
D. Custom controls must return values in a format that conforms to C/AL.
Answer: BD
Microsoft certification MB7-840 MB7-840 examen
NO.15 Which of the following processes can be handled by Microsoft Dynamics NAV when using Web
services?
A. User rights authorization
B. Concurrency control
C. Responding to user interaction requests
D. Input data validation
Answer: ABD
Microsoft examen MB7-840 certification MB7-840 MB7-840
NO.16 Which component of the Microsoft Dynamics NAV 2009 platform enables integration through Web
services?
A. Winforms
B. Application Server
C. Microsoft SQL Server
D. Microsoft Dynamics NAV Server
Answer: D
Microsoft certification MB7-840 MB7-840 examen MB7-840
NO.17 Which action type is the top level element in the Action Designer's actions hierarchy and is used to
accommodate other action subtypes?
A. Action Area
B. Action Pane
C. Action Container
D. Action Group
Answer: C
Microsoft MB7-840 examen MB7-840 examen
NO.18 Pages in the RoleTailored client have several controls that are not available on forms. What type(s) of
pages is it recommended that you use Cues, a new page control, on?
A. On Role Center and Document pages
B. On Document and Card pages
C. Only on the Role Center page
D. Only on ListPlus pages
Answer: C
Microsoft MB7-840 examen MB7-840 MB7-840
NO.19 Which application objects cannot be run directly from the Object Designer?
A. Pages
B. Dataports
C. XMLports
D. MenuSuite
Answer: ACD
certification Microsoft MB7-840 examen certification MB7-840 MB7-840
NO.20 When setting up Microsoft Dynamics NAV 2009 integration with an external application (for example,
Microsoft Office Access) by means of Microsoft Dynamics NAV ODBC, which limitations do you consider?
A. Microsoft Dynamics NAV ODBC driver does not work directly with Microsoft SQL Server
B. Data cannot be entered through Microsoft Dynamics NAV ODBC.
C. Microsoft Dynamics NAV ODBC cannot process zero-length strings.
D. Microsoft Dynamics NAV ODBC does not allow multiple user sessions.
Answer: AC
Microsoft examen MB7-840 MB7-840 MB7-840
Choisir le Pass4Test peut vous aider à réussir 100% le test Microsoft MB7-840 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.
没有评论:
发表评论