IBM C4040-221 examen pratique questions et réponses

Pass4Test est un bon site qui provide la façon efficace à se former à court terme pour réussir le test IBM C4040-221, c'est un certificat qui peut améliorer le niveau de vie. Les gens avec le Certificat gagent beaucoup plus que les gens sans Certificat IBM C4040-221. Vous aurez une space plus grande à se développer.

Vous aurez le service de la mise à jour gratuite pendant un an une fois que vous achetez le produit de Pass4Test. Vous pouvez recevoir les notes immédiatement à propos de aucun changement dans le test ou la nouvelle Q&A sortie. Pass4Test permet tous les clients à réussir le test IBM C4040-221 à la première fois.

Nous assurons seulement le succès de test certification, mais encore la mise à jour est gratuite pour vous. Si vous ne pouvez pas passer le test, votre argent sera 100% rendu. Toutefois, cette possibilité n'est presque pas de se produire. Vous pouvez tout d'abord télécharger le démo gratuit pour prendre un essai.

Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test IBM C4040-221. La ressourece providée par Pass4Test peut juste s'accorder votre demande.

Code d'Examen: C4040-221
Nom d'Examen: IBM (AIX 7 Administration )
Questions et réponses: 229 Q&As

C4040-221 Démo gratuit à télécharger: http://www.pass4test.fr/C4040-221.html

NO.1 The following information has been reported in an AIX error log:
How can the administrator prevent the error from reoccurring?
A. Create a secondary dump device greater than 266MB
B. Increase primary dump device size greater than 266MB
C. Increase "/var" file system to ensure it has a minimum of 266MB free space
D. Increase "/var/adm/ras/livedump" file system to ensure it has a minimum of 266MB free space
Answer: C

IBM examen   certification C4040-221   C4040-221 examen   certification C4040-221   C4040-221 examen   C4040-221 examen

NO.2 How can an administrator disable Role Based Access Control (RBAC) in a WPAR?
A. Run chattr -E -I sys0 -a enhanced_RBAC=false Reboot the WPAR
B. Run the RBAC wizard and deselect 'Enable RBAC Reboot the system
C. Run chdev -I mywpar -a enhanced_RBAC=false Reboot the Global Environment
D. Run chwpar -a RBAC=false Reboot the WPAR
Answer: C

IBM   C4040-221   C4040-221   C4040-221

NO.3 Which technology provides the maximum amount of usable storage and resilience for a
system with 6 physical volumes?
A. RAID 0
B. RAID 1
C. RAID 5
D. RAID 6
Answer: C

IBM   C4040-221   certification C4040-221   C4040-221

NO.4 What is a requirement for Live Partition Mobility?
A. The network and disk must be virtual.
B. The disk must be virtual and a Logical Host Ethernet Adapter (LHEA) for network.
C. The client partition must be connected to a SAN.
D. The client partition must be set up as a 'Mover Service Partition'.
Answer: A

IBM examen   C4040-221   C4040-221   C4040-221   C4040-221 examen   C4040-221

NO.5 An LPAR is configured with strict logical volume mirroring across two disks for resilience. The
administrator would like to ensure if one disk fails the volume group stays online. Which command
will ensure that the datavg volume group stays online?
A. varyonvg -n datavg
B. mirrorvg-Q-c 2 datavg
C. mklvcopy -e m -s y (each logical volume name) 2
D. chvg -Qn datavg
Answer: D

certification IBM   C4040-221   C4040-221

NO.6 A host has a single virtual Ethernet adapter (ent0) configured with only a default PVID, and the
administrator is trying to determine why it cannot be used to reach any other system on the
network. He suspects that it may be caused by a problem in the VLAN configuration.
How would the administrator determine the VLAN for which the adapter was configured?
A. Use the command 'Isdev -I ent0' on the host to determine the port VLAN ID.
B. Use the command 'Isattr-EI ent0' on the host to determine the port VLAN ID.
C. Look on the HMC to determine which VLAN is configured for the adapter.
D. Examine the Shared Ethernet Adapter on the Virtual I/O Server to determine which VLAN the
adapter is using.
Answer: C

IBM   certification C4040-221   certification C4040-221   certification C4040-221

NO.7 What is the difference between deferred and concurrent firmware updates?
A. Deferred firmware can be applied concurrently but contains updates that affect the internal
program load path, which are not activated until the next time the server is shut down and restarted.
B. Concurrent firmware must be done on all LPARs in the frame at the same time. Deferred
firmware can be loaded on each LPAR at a different time and only becomes active when the LPAR is
shutdown and restarted.
C. Deferred firmware can only be applied during an outage to the managed system as it will
automatically shut the managed system down during its installation.
D. Concurrent firmware is only for minor fixes to the system mircocode while deferred firmware
contains major fixes to the service processor.
Answer: A

IBM examen   C4040-221   C4040-221   C4040-221   C4040-221

NO.8 After performing a NIM rte install, the administrator noticed that not all filesets are at the
correct Technology Level (TL). What action will help the administrator determine why the
inconsistent fileset levels were installed?
A. On the NIM server, run an Ippchk to identify if the Software Vital Product Data is valid.
B. On the NIM client, run oslevel command against the TL to identify missing prerequisites.
C. Run instfix command on NIM client to determine what filesets are inconsistent.
D. On the NIM server run the NIM IsIpp command to indentify downlevel filesets contained in the
lpp_source.
Answer: D

IBM   certification C4040-221   C4040-221   C4040-221 examen

La Q&A IBM C4040-221 de Pass4Test est liée bien avec le test réel de IBM C4040-221. La mise à jour gratuite est pour vous après vendre. Nous avons la capacité à vous assurer le succès de test IBM C4040-221 100%. Si malheureusement vous échouerez le test, votre argent sera tout rendu.